Galbreath Trailers

Galbreath Heavy Duty Tri-Axle Trailer

Galbreath Heavy-Duty Tri-Axle Trailers handle inside/outside rail or outside rail containers and are designed for hauling scrap, hazardous waste, and refuse. They have a hoist capacity of 60,000 lbs., 19-1/2” trailer I-beam fabricated, 50,000 lb. single point suspension, 25,000 lb. single point non-steer lift axles, 10-hole hub piloted steel rims, 11R/22.5 tires, and an ABS braking system. The street side front fender trailer brake is air operated, the front fenders are full steel, and there are seven wire electric connections with service and emergency air lines with glad hands and hoist up and backup alarm connection.

LED lighting is DOT-approved, and both the mid-body turn signals and bumper have LED lights. The bumper is energy-absorbing, there is a 50,000 lb. two-speed landing gear, 18” fifth wheel pin setting, 10” x 4” x ½” rectangular tubing, an ASTM A500 hoist main frame, 2-spool control valve, turn lock quick disconnects, 1” pressure line with 1-1/4” return line, two 6-1/2” x 4-1/2” x 144” winch cylinders and two 6″-5″-4″ X 118″ DA telescopic lift cylinders to offer better stability. There is also a 7/8” hoist cable,  a heavy-duty cable swivel eye, a cable hook holder, hoist maintenance safety props, ratchet rear hold downs, and primed and painted with 2 part epoxy paint.

Galbreath Tandem Axle Trailer

Galbreath Heavy-Duty Tandem Axle Trailers are best for use in the scrap and refuse industries. They have a trailer main frame 16′ W. F. Milled I-Beam A36 32 LB, 50,000 lb. single point suspension, 25,000 lb. single point non-steer lift axles, 10-hole hub piloted steel rims, 11R/22.5 tires, and an ABS braking system. The trailer brake at street side front fender is air operated, the front fenders are full steel,  and there are seven wire electric connections with service and emergency air lines with glad hands and hoist up and backup alarm connection.

LED lighting is DOT-approved, and both the mid-body turn signals and bumper have LED lights. The bumper is energy-absorbing, there is a 50,000 lb. two-speed landing gear, 24” fifth wheel pin setting, 8” x 4” x ½” rectangular tubing, an ASTM A500 hoist main frame, 2-spool control valve, turn lock quick disconnects, 1” pressure line with 1-1/4” return line, two 6″-5″-4″ X 118″ DA telescopic lift cylinders, and two 7″ X 4″ X 108″ Winch Cylinders. There is also a 7/8” hoist cable,  a heavy-duty cable swivel eye, a cable hook holder, hoist maintenance safety props, ratchet rear hold downs, and primed and painted with 2 part epoxy paint.

Galbreath Lightweight Roll Off Trailer

Galbreath Lightweight Roll-Off Trailers have shorter overall length for maneuverability, a lower trailer height to accommodate tall containers, hoist capacity of 60,000 lbs., 50,000 lb. single point suspension, 25,000 lb. axles, 10-hole hub piloted steel rims, 11R/22.5 tires, and an ABS braking system. The trailer brake at street side front fender is air operated, rear fenders are ¼ poly,  and there are seven wire electric connections with service and emergency air lines with glad hands and hoist up and backup alarm connection.

LED lighting is DOT-approved, and both the mid-body turn signals and bumper have LED lights. The bumper is energy-absorbing, there is a 50,000 lb. two-speed landing gear, 18” fifth wheel pin setting, 8” x 4” x ½” rectangular tubing, an ASTM A500 hoist main frame, 2-spool control valve, turn lock quick disconnects, 1” pressure line with 1-1/4” return line, two 6″ x 5″ DAT lift cylinders, and two 7″ X 4″ X 108″ Winch Cylinders. There is also a 7/8” hoist cable,  a heavy-duty cable swivel eye, a cable hook holder, hoist maintenance safety props, ratchet rear hold downs, and primed and painted with 2 part epoxy paint.

Galbreath Specialty Roll-Off Trailers are designed with a movable center carriage to maximize weight distribution. They have a GVWR Outer bridge of 80,000 lbs., trailer main frame 22” I Beam, 45,000 lb. single point suspension, 25,000 lb. axles, 10-hole hub piloted steel rims, 11R/22.5 tires, and an ABS braking system. The trailer brake at street side front fender is air operated, front and back fenders are aluminum tread,  and there are seven wire electric connections with service and emergency air lines with glad hands and hoist up and backup alarm connection.

LED lighting is DOT-approved, and both the mid-body turn signals and bumper have LED lights. The bumper is energy-absorbing, there is a 50,000 lb. two-speed landing gear, 24” fifth wheel pin setting, 10” x 4” x 3/8” rectangular tubing, an ASTM A500 hoist main frame, 3-spool control valve, turn lock quick disconnects, 1” pressure line with 1-1/4” return line, two 6″ x 4-1/2” x 72″ DA lift cylinders, two 6″ x 3″ x 90″ winch cylinders. There is also a 7/8” hoist cable,  a heavy-duty cable swivel eye, a cable hook holder, hoist maintenance safety props, ratchet rear hold downs, and primed and painted with 2 part epoxy paint.

Galbreath Texas Tongue (TT) RollOff Cable Hoist Trailers are ideal for transporting two container loads safely and effectively. These trailers allow users to haul loads with or without roll off ready trucks. The TT is specifically designed to work integrally with Galbreath’s pintle ready aprons, which allow for jack-knifing the trailer for over-the-tongue dumping without having to disconnect.

They offer turn lock quick disconnects (hydraulic) for fast hook up and drop off, plug n’ play wiring system, outside controls positioned in the center of trailer tongue, single leg hydraulic landing gear, and an ABS braking system for ease of operation. Safety features include split bumper w/ LED lighting and back‐up alarm, fixed ratchet hold downs, heavy duty safety stops, ICC bumper, and a heavy duty rear apron assembly.

Durability is not an issue because all pivot joints, roller assemblies & sheave blocks are easy to access for service and grease,  a phosphorus wash is used prior to the two‐part epoxy primer and pain, there is a limited lifetime warranty on the frame, and a 2 year limited hydraulic system warranty. Lean manufacturing processes, solid engineering with solid modeling to ensure maximum product quality, stress analysis testing, T‐1 fabricated tongue, A500 Grade‐C tubing, and 3,000 psi working pressure hoses ensure quality built products.

Galbreath Trail Hoists are designed for versatility to handle improvement projects to waste handling and landscaping. When it comes to hauling your most important gear, these purpose-built trailers are engineered with the highest quality materials, spring suspension axles, and more frame reinforcement than the competition. Designed for the most demanding jobs, Galbreath Trail Hoists are built to last.

They have an adjustable bolt on hitch for proper ride height alignment (2 5/16” ball mount or 3” pintle lunette), bolt on top wind trailer jack  with 8,000 lb. capacity, Honda 390GX power unit with electric start, linkage controlled valves at front on driver’s side, a 7 pin trailer plug and harness weather sealed, greased grooved sheaves in the winch system, heavy duty side rollers with bronze greaseable bushings, 5/8” steel cable with pear end, and an automatic front container locking mechanism.

Galbreath Trail Hoists also include dual hoist maintenance props, red and white reflective tape marking entire hoist front to back, stationary rear hold downs, emergency trailer breakaway trailer brakes, two part epoxy primer and paint for a high gloss and durable finish, LED lighting, high strength steel tubing and bracing, 14 gauge steel tread-plate fenders, Dexter tandem axle spring suspension with (2) 7,200 lb. drop shaft axles and electric brakes, LT235/80 R16 – 10 ply tires on 8 lug 16 x 7 steel white spoke rims, solid modeling and stress analysis testing ensure high quality and consistent product delivery, and a 1 year warranty.